Nivtec ramps – wheelchair approved
Build ramps from standard podiums
You just hook the male side of the podium into the female side, the profile can withstand the twist of a stage at a height of 40 cm.
For higher stages, the ramp just needs to be made from multiple stage podiums.
Ramp leg with ball base
A ramp for a stage that is 40 cm high needs no legs.
But for higher scenes, we have special ramp legs that can be tilted and are adjustable +/- 3 cm.
Easy ramp wedge in multiple sizes
Finally, attach the ramp wedge to the podium and the ramp is ready.
We have different sizes of ramp wedges depending on whether you need the ramp for grand pianos or wheelchairs.
Approved ramp railings
Our handrails are approved for 100 kg/m, so you can use the ramp for wheelchairs.
It has been approved by accessibility consultants.
APPROVED RAMPS FOR WHEELCHAIRS AND EQUIPMENT
Ramp wedges
In aluminum. Hooks onto the podium. We also have a reinforced special model.
Podium to podium connector
Used to extra secure the ramp, especially for wheelchair use.
In aluminum.
Ramp legs, adjustable +/- 3 cm
With ball base so they can stand at an angle, perfect for ramp set-up.
Height-adjustable screw and lock nut.
Ă 48.3 mm. Pipe thickness: 4 mm.
Floor protector is included in the price.
See also our page about ramps here.
Stage railing, can also be used for ramps.
Height 100 cm. Approved and certified for 100 kg/m. In galvanized steel. Ă 33.7 mm.
Handrail bolt
The railing bolt is screwed into the leg (or an adapter if there is no leg).
That’s why the handrail is so strong.
Ă 26 mm. In galvanized steel.
Adapter for leg lock
Used when there is no leg to screw the railing into. You can also use a regular 20 cm leg instead. It’s more expensive, but it won’t be forgotten in the leg locks when packing up the stage and can also be used as a regular stage leg.
Ă 48.3 mm, in galvanized steel. 20 cm leg is in aluminum with adapter.
Special ratchet wrench
19 mm with specially sharpened tip to remove plastic plugs from podiums. Used to put up railings and stairs.
Railing connects
In galvanized steel. Required by law to prevent small children from getting their heads down between two handrails. The bottom connector is used for the sides of stands.
Ramp wedge handrail
Used to close the “gap” at the top of the ramp.
Contact us for more info.
Approved and certified for 100 kg/m.
Height 100 cm. In galvanized steel. Ă 33.7 mm.
Need a ramp NOW!
We usually have ramp wedges and other ramp accessories in our warehouse in Slagelse, so they can be shipped or picked up at short notice. Call us on +45 31 15 77 77.
Download
Nivtec katalog udvidelse 2018
We can advise you, so you get the right solution
Call us on +45 31 15 77 77 77